1. Until now radiation emissions were measured with external device.

2. To reduce the number of accesses to the external device, a buffer is used.

3. The unit may connect to an external device either via wired or wireless means.

4. The external feedback mode allows an external device to be used as the feedback element of the electrometer.

5. Crash is caused by an interrupt from a external device, such as an I/O bus controller.

6. Interface: It is a board that links an external device to a computer.

7. In these cases, an external device such as a SCSI DDS tape drive will often suffice.

8. For input, the transport layer reads from the external device and fills the buffer.

9. At this development stage control is most easily achieved with an external device.

10. The transfer circuit transfers the read group management data and the read data group managed thereby to an external device.