(1) Recuperator is an important component in the loop.

(2) The status quo of the recuperator development for the energy island is summarized, and types of heat transfer surfaces, materials and manufacturing technologies are discussed in this paper.

(3) The recuperator is one of the main components of the micro turbine in energy island system.

(4) It must be a kind of recuperator which has small volume, light weight, high recuperated effectiveness and high reliability for using on micro gas turbine.

(5) Recuperator , as the key part in recuperated cycle(http://), plays the important role in efficiency increasing of gas turbine.

(6) The recuperator tube of ammonia condenser on a factory was made of 316L stainless steel and pitted after used for only one year.

(7) The technical processing of designing and producing the cast iron recuperator for hot blast cupola is available.

(8) Recoil mechanism of simulated firing device consists of structural forms of double recoil brakes and single recuperator.

(9) Generally, the system is used to acquire the parameters of the recuperator's liquid and gas, then to judge whether the recuperator is working regularly.

(10) Working principle, construction and control of the burner with integrated recuperator(BICR) provided with radiant tube and developed by Kromschroeder Co. of Germany were described.

(11) The application results demonstrate that the combined radiation and convection recuperator has remarkable advantages for top one-way-fired soaking pits.

(12) The application of equal mass flow method in high temperature recuperator test system is discussed.

(13) A stainless-steel exhaust collector-diffuser, which is based on proven low-loss industrial and marine designs, moves a uniform flow of exhaust air to the recuperator.

(14) The flowing and heat transfer in the primary surface recuperator(PSR) can be influenced by unreasonable inlet structure which results in uneven material flow distribution.

(15) This paper represents a numerical method to simulate the complex heat transfer in a radiant metal recuperator .

(16) The accounting model and matrix model of thermoeconomics are implemented to study the micro gas turbine with heat recuperator .

(17) Working principle, construction and control of the burner with integrated recuperator(BICR) provided with radiant tube and developed by Kromschroeder Co.

(18) The feasibility and correctness of the parametric design for hydropneumatic recuperator are validated by an example.

(19) Objective To investigate the effect of sanatorium treatment in recuperator with diabetics.

(20) At the present time, from the point of view of recycling waste heat of intermediate and low temperature fume the recuperator has still more extensive spreading values and prospects for applying.