1. The using and curing time decreased with the increasing of accelerant amount.

2. In conjunction with adhesive curing time refers to the solidification process.

3. The influence of the curing time on the structure and properties of SBR ebonite was investigated.

4. The effects of curing time, temperature and bleeding capacity on ice - formation pressure of grout were studied.

4. try its best to gather and create good sentences.

5. A suitable catalyst, dibutyltin dilaurate(T-12) of shortening the curing time of the HTPB-TDI binder system was choosed.

6. The curing time of the fast curing mica paper tape is shorter than the TUNG-MA epoxy glass mica paper tape, and it can economize the energy sources and make long development.

7. And the curing time is dependent on the speed of light pressure.

8. Effect of curing temperature, curing time, resistance to media, kind and volume of the sand-laden fluid, and particle size of proppant on fibre compound sand control system were discussed.

9. Conclusion Preventive insertion of NIT during operation is useful in reducing gastroplegia oceurrance and shortening the curing time in the gastroplegia high risk patients.

10. It can be quicky cured and resisted high temperature for class H in a short curing time and low evaporation losses.

11. Through analyzing each factor such as concentration of citric acid and chitin, curing temperature as well as curing time, the optimum condition is defined for the anti-crease finish.

12. Quick-drying at room temperature operation time of less than 20 minutes, curing time is 1 hour.

13. However, this coating has disadvantages such as a long curing time, high shrinkage rate, poor performance bond, the quality of instability, and so on.

14. Reduce the temperature and light intensity, to extend the curing time.