1. At the same time, the compatibilization mechanisms were given.

2. Through compatibilization, PP/PS composite could not only improve uniformity in its phase morphology, but also strengthen its interfacial adhesion between the phases.

3. In order to achieve the in-situ compatibilization of PP and other polymers, we must firstly achieve the functionalization modification of PP.

4. The current development situation, compatibilization technology, main properties and application of polyamide alloys are introduced.

5. Reactive compatibilization, its mechanism and morphology control factors in polymer blends were briefly reviewed.

6. Tbe compatibilization of the melt graft of PP with MAH and unsaturated acid on PP/PA6 blend by reactive extrusion was studied in this paper.

7. The compatibilization between PDAP and LDPE was verified by TGA, torque analysis and dynamically rheological experiments.

7. try its best to collect and make good sentences.

8. The result showed that CPE had good compatibilization for PVC/SBR blend.

9. The compatibilization of the PA/ABS alloy and the effects of PA and ABS on the properties of the alloy are expatiated.

10. I used to develop the installation of the generators is undoubtedly the most economic, most simple Compatibilization programme.

11. A review is presented on the synthetic, structure and property of ionomer. The compatibilization of ionomer in blends are also listed.

12. The kind of polymer blends and the mechanism of compatibilization are introduced briefly.

13. POE-g-MAH obviously improved the toughness and strength of PP/PA6 blending system due to its superior compatibilization.

14. New approaches for optimization of UV stabilization using grafting, compatibilization, polymerizable stabilizers and polymer bound stabilizers are emphasized.

15. Observing the low temperature brittle fracture face of PE/NBR by electron scanning microscope, the compatibilization of PE-MAH was reflected clearly.

16. The characteristics and preparation methods of reactive compatibilizers and the reaction types of reactive compatibilization were reviewed.

17. The influences of ABS and processing conditions on the properties of the blends are analyzed , and the techniques of compatibilization modification are discussed.

18. Currently part of operation limestone - gypsum wet desulphurization equipment, due to the changes of sulfur content coal, that face absorber compatibilization situation.

19. Practical case studies in this paper, domestic coal-fired power plant desulfurization absorber compatibilization common technical solutions, and comparative analysis of advantages and disadvantages.

20. The results showed the PS with small particle size was propitious to the compatibilization of PS with PP, and the overall properties of PS/PP would be better.