1 Thus, for example, and respectively represent the collector current and potential difference between the collector and emitter.

2 Features: Low saturation voltage , large collector current.

3 The waveforms of the collector current and collector-emitter voltage are also determined under the optimum operation condition.

4 Does the collector current rise in equal steps for equal increments of base current?

5 In other words, collector current mimics, or mirrors, diode current.

6 The waveforms of the collector current and collector - emitter voltage also determined under the optimum operation condition.

7 At the entrance to the water with check valve to prevent water at night by the collector current, and cause the heat loss.

8 With this method in mind, the features of the collector current are analyzed when resonating circuit or resistor is loaded.

9 The circuit siphons off most of the current through RLS to ground as the collector current of Q1.

10 Phototransistor. Collector-emitter voltage 30 V. Emitter-collector voltage 6 V. Collector current 20 mA. Power dissipation 100 mW.

11 The base current and the junction leakage current increase, while the collector current and the breakdown voltage decrease for SiGe HBTs after radiation.