1. What is the uP data and address bus width?

2. The address bus specifies the memory locations ( addresses ) for the data transfers.

3. The actual address that is placed on the address bus when accessing a memory location or register.

4. The address bus is used by the processor to select aspecific memory location or register within a particular peripheral.

5. The microprocessor uses the address bus to locate data stored in memory.

6. Address Bus: Locates data stores in the memory, input port, or output port.

7. The power dissipated by the address bus is the important power dissipation source of the DSP.

8. The enable logic must not enable the buffers unless it receives the correct address from the address bus.

9. The AO line is usually tied to the least significant bit of the address bus.

10. The irredundant sorting bus encoding method reduces the power dissipation of highly capacitive memory address bus based on the dynamic reordering of the modified offset address bus lines.

11. A memory map is the addressing plan for the address bus bits.