(1) The method making initial acceleration time history in the . normal method has been improved, and it is recommended to use real earthquake acceleration records for initial time history.

(2) The acceleration time response graphs at desired positions were presented under three load conditions:the maximum dynamic pressure, before separation, after separation.

(3) The acceleration time and deceleration time were corrected with pulse pressure and heart rate ( ATi and DTi ).

(4) The earthquake acceleration time histories of 16 groups along the main piers of Nanpu Bridge which are calculated using the present method have been used for the seismic design of the bridge.

(5) The acceleration time automobile body lifts, when and the speed quicker time scope reduces.

(6) The peak forward velocity(PFV), peak reverse velocity(PRV), acceleration time(AT), and deceleration time(DT) were determined and compared.

(7) The normal method to simulate earthquake acceleration time history is analyzed, and it is shown clearly that choice of initial acceleration time history is important.

(8) It uses 750-horsepower V8 engine , and the acceleration time 0-96km / h is 3 seconds.

(9) Objective:To search for the regular rule of acceleration time(AT) of fetal umbilical artery and cerebral artery.

(10) It's obtained that the strongest liquefaction lags behind the peak acceleration time.

(11) Top speed is 155 mph and the Portfolio has a 0 to 60 mph acceleration time of five seconds.

(12) The basis analysis on the change in momentum, velocity and other related factors of solid particles in settling slurry over the acceleration time is carried out.

(13) Maintenance-free brushless drive motor with frequency inversion, has high start torque and short acceleration time.

(14) The present seismic wave data is given in the form of acceleration time history; and the velocity and displacement time histories obtained by direct integration exist obvious baseline drift.

(15) Methods Liver scanning was performed with a high frequency transducer to measure the velocity acceleration time and resistant index of portal vein and hepatic artery after finishing the anastomosis.

(16) The result shows that the strength feature of knee joint, back and waist muscle can be evaluated based on the parameters of relative moment of various joints, acceleration time and angle of moment.